Texas Instruments SN74AUP1G74DCUR

Lifecycle Status

ACTIVE (Last Updated: 3 days ago)

Factory Lead Time

6 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-VFSOP (0.091, 2.30mm Width)

Number of Pins

8

Weight

29.993795mg

Clock-Edge Trigger Type

Positive Edge

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

74AUP

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Type

D-Type

Packing Method

TR

Voltage - Supply

0.8V~3.6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Supply Voltage

1.2V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Base Part Number

74AUP1G74

Function

Set(Preset) and Reset

Output Type

Differential

Polarity

Non-Inverting

Supply Voltage-Max (Vsup)

3.6V

Number of Channels

1

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

30pF

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

4mA

Number of Bits

1

Clock Frequency

100MHz

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

27 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

500nA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

4 ns

Family

AUP/ULP/V

Logic Function

AND, D-Type

Output Characteristics

3-STATE

Max I(ol)

0.004 A

Max Propagation Delay @ V, Max CL

7ns @ 3.3V, 30pF

Trigger Type

Positive Edge

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

1.5pF

Power Supply Current-Max (ICC)

0.0009mA

Max Frequency@Nom-Sup

40000000Hz

Height

900μm

Length

2.3mm

Width

2mm

Thickness

850μm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free