Texas Instruments SN74HC74PWR

Lifecycle Status

ACTIVE (Last Updated: 4 days ago)

Factory Lead Time

6 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

14-TSSOP (0.173, 4.40mm Width)

Number of Pins

14

Weight

57.209338mg

Clock-Edge Trigger Type

Positive Edge

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Series

74HC

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

ECCN Code

EAR99

Type

D-Type

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Packing Method

TR

Voltage - Supply

2V~6V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Supply Voltage

5V

Base Part Number

74HC74

Function

Set(Preset) and Reset

Output Type

Differential

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Polarity

Non-Inverting

Supply Voltage-Max (Vsup)

6V

Supply Voltage-Min (Vsup)

2V

Number of Circuits

2

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

40μA

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

5.2mA

Clock Frequency

60MHz

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

37 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

15 ns

Family

HC/UH

Logic Function

AND, D-Type, Flip-Flop

Current - Quiescent (Iq)

4μA

Number of Bits per Element

1

Max Propagation Delay @ V, Max CL

30ns @ 6V, 50pF

Trigger Type

Positive Edge

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

3pF

Number of Input Lines

4

Max Junction Temperature (Tj)

150°C

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

85°C

Height

1.2mm

Length

5mm

Width

4.4mm

Thickness

1mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free