CD4013BM

Texas Instruments CD4013BM

Part No:

CD4013BM

Manufacturer:

Texas Instruments

Datasheet:

-

Package:

14-SOIC (0.154, 3.90mm Width)

ROHS:

AINNX NO:

3118777-CD4013BM

Description:

TEXAS INSTRUMENTS CD4013BM Flip-Flop, TTL, Positive Edge, D, 45 ns, 12 MHz, 6.8 mA, SOIC, 14 Pins

Products specifications
  • Lifecycle Status
    ACTIVE (Last Updated: 1 day ago)
  • Factory Lead Time
    6 Weeks
  • Contact Plating

    Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

    Gold
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Package / Case
    14-SOIC (0.154, 3.90mm Width)
  • Number of Pins
    14
  • Weight
    129.387224mg
  • Clock-Edge Trigger Type
    Positive Edge
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C~125°C TA
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tube
  • Series
    4000B
  • JESD-609 Code
    e4
  • Pbfree Code
    yes
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Number of Terminations
    14
  • ECCN Code
    EAR99
  • Type
    D-Type
  • Voltage - Supply
    3V~18V
  • Terminal Position
    DUAL
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Supply Voltage
    5V
  • Base Part Number
    CD4013
  • Function
    Set(Preset) and Reset
  • Number of Outputs
    4
  • Output Type
    Differential
  • Polarity
    Non-Inverting
  • Supply Voltage-Min (Vsup)
    3V
  • Number of Channels
    2
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    50pF
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    6.8mA
  • Clock Frequency
    24MHz
  • Propagation Delay

    the flight time of packets over the transmission link and is limited by the speed of light.

    45 ns
  • Quiescent Current

    The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

    20μA
  • Turn On Delay Time

    Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

    45 ns
  • Logic Function
    AND, D-Type, Flip-Flop
  • Current - Quiescent (Iq)
    4μA
  • Number of Inputs
    1
  • Max I(ol)
    0.0068 A
  • Number of Bits per Element
    1
  • Max Propagation Delay @ V, Max CL
    90ns @ 15V, 50pF
  • Prop. Delay@Nom-Sup
    300 ns
  • Trigger Type
    Positive Edge
  • Input Capacitance

    The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

    5pF
  • Power Supply Current-Max (ICC)
    0.06mA
  • Max Frequency@Nom-Sup
    3500000Hz
  • Ambient Temperature Range High

    This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

    125°C
  • Height
    1.75mm
  • Length
    8.65mm
  • Width
    3.91mm
  • Thickness
    1.58mm
  • REACH SVHC
    No SVHC
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
  • Lead Free
    Lead Free
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Texas Instruments CD4013BM.