Schneider Electric XU2M18MA230K

Mfr

Schneider Electric

Product Status

Active

Package

Box

Explosion safety category for dust

None

Rated control supply voltage at DC

24 - 240

Explosion safety category for gas

None

Suitable for safety functions

No

Degree of protection (IP)

IP67K

Voltage type

AC/DC

Material housing

Metal

Max. output current

200

Rated control supply voltage at AC 60 Hz

24 - 240

Ambient temperature

-25 - 55

Type of electric connection

Connector 1/2 inch

Rated control supply voltage at AC 50 Hz

24 - 240

Series

-

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C ~ 55°C

Voltage - Supply

24 ~ 240VAC/DC

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

IP67

Output Configuration

SCR, NO

Cable Length

A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

-

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

20ms

Adjustment Type

Adjustable

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

590.551" (15m)

Sensing Method

Through-Beam

Connection Method

the systematic way of connecting the Power Plant (units) to the power grid.

Connector, UNF

Light Source

an optical transmitter that is paired with an optical receiver, both of which are connected to electrically based devices or systems.

Red LED, Yellow LED