Schneider Electric XUB0BPSNL2

Mount

Through Hole

Housing Material

Brass

RoHS

Compliant

Type of electric connection

Cable radial

Ambient temperature

-25 - 55

Max. output current

100

Material housing

Metal

Voltage type

AC/DC

Degree of protection (IP)

IP65

Suitable for safety functions

No

Explosion safety category for gas

None

Rated control supply voltage at DC

12 - 24

Explosion safety category for dust

None

Package

Box

Mfr

Schneider Electric

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C ~ 55°C

Series

-

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

55 °C

Min Operating Temperature

-25 °C

Voltage - Supply

12V ~ 24V

Ingress Protection

Ingress Protection rating (or just IP rating), is an international standard (IEC 60529) used to rate the degree of protection or sealing effectiveness in electrical enclosures against intrusion of objects, water, dust or accidental contact. It corresponds to the European standard EN 60529.

IP65, IP67

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

100 A

Output Configuration

PNP-NC/NO

Cable Length

A nautical unit of measure equal to one tenth of a nautical mile or approximately 1 fathoms.

78.74 (2m)

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

100 mA

Throw Configuration

DPST

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

1ms

Adjustment Type

-

Sensing Distance

It is the sensing range for which the sensor can stably detect the standard sensing object even if there is an ambient temperature drift and/or supply voltage fluctuation. (Normally, it is 70 to 80 % of the maximum operation distance.)

787.402 (20m)

Sensing Method

-

Max Supply Voltage (DC)

24 V

Connection Method

the systematic way of connecting the Power Plant (units) to the power grid.

Cable

Light Source

an optical transmitter that is paired with an optical receiver, both of which are connected to electrically based devices or systems.

Green LED, Red LED, Yellow LED

Min Supply Voltage (DC)

12 V

REACH SVHC

Unknown

Ratings

IP65, IP67