Opto 22 Z240D10

Mount

Panel, Screw

Number of Pins

4

Input Polarity

AC

Manufacturer Part Number

Z240D10

Manufacturer

Opto 22

Mounting

Panel

Switching Mode

DC Switch

Operating Temperature-Min

-40 °C

Operating Temperature-Max

100 °C

Part Life Cycle Code

Contact Manufacturer

Ihs Manufacturer

OPTO TWENTY-TWO (22)

Risk Rank

5.24

Termination

Quick Connect

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

100 °C

Min Operating Temperature

-40 °C

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8541.40.95.00

Subcategory

Solid State Relays

Depth

38.1 mm

Reach Compliance Code

compliant

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

10 A

Approval Agency

CE, CSA, UL

Output Voltage

280 V

Max Output Current

The maximum current that can be supplied to the load.

10 A

Number of Circuits

1

Max Voltage Rating (AC)

280 V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

10 A

Input Type

DC

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

240 V

Overall Height

22 mm

Nominal Output Voltage

3.3 VDC, 6 VDC, 12 VDC, 24 VDC

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

10 A

Max Supply Voltage (AC)

280 V

Input Signal

input signal is the signal going into an electronic system.

24-280 VAC

Overall Length

66 mm

Output Circuit Type

Triac

Control Voltage

3 V

Contact Configuration

-

Min Supply Voltage (AC)

24 V

Height

13.7 mm

Length

46 mm

Width

13.7 mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free