Z120D10

Opto 22 Z120D10

Part No:

Z120D10

Manufacturer:

Opto 22

Datasheet:

-

Package:

Hockey Puck

AINNX NO:

29426073-Z120D10

Description:

Solid State Relay,

Products specifications
  • Mounting Type
    Chassis Mount
  • Package / Case
    Hockey Puck
  • Supplier Device Package
    -
  • Operating Temperature Classification
    Industrial
  • Operating Temp Range
    -40C to 100C
  • Rad Hardened
    No
  • Mounting
    Screw
  • Input Polarity
    AC
  • Manufacturer Part Number
    Z120D10
  • Manufacturer
    Opto 22
  • Switching Mode
    DC Switch
  • Package
    Box
  • Mfr
    Opto 22
  • Product Status
    Active
  • Operating Temperature-Min
    -40 °C
  • Operating Temperature-Max
    100 °C
  • Part Life Cycle Code
    Contact Manufacturer
  • Ihs Manufacturer
    OPTO TWENTY-TWO (22)
  • Risk Rank
    5.24
  • Series
    -
  • Termination
    Screw Terminal
  • HTS Code

    HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

    8541.40.95.00
  • Subcategory
    Solid State Relays
  • Reach Compliance Code
    compliant
  • Current Rating

    Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

    10 A
  • Pin Count

    a count of all of the component leads (or pins)

    4
  • Termination Style
    Quick Connect, Disconnect
  • Output Voltage
    3-32 VDC
  • Output Type
    AC, Zero Cross
  • Circuit
    SPST-NO (1 Form A)
  • Number of Circuits
    1
  • Input Type
    AC
  • Voltage - Load
    12 V ~ 140 V
  • Overall Height
    22 mm
  • Nominal Output Voltage
    3.3 VDC, 6 VDC, 12 VDC, 24 VDC
  • Load Current

    The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

    10A
  • Isolation Voltage

    Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

    4000(V)
  • Input Signal

    input signal is the signal going into an electronic system.

    12-140 VAC
  • Overall Length
    66 mm
  • Output Circuit Type
    Triac
  • Control Voltage
    3 V
  • Contact Configuration
    -
  • Input Voltage
    140(V)
0 Similar Products Remaining