Opto 22 DC200MP

Mount

PCB, Through Hole

Number of Pins

4

Voltage Rating (DC)

200 V

Input Polarity

DC

Manufacturer Part Number

DC200MP

Manufacturer

Opto 22

Mounting

Panel

Operating Temperature Classification

Industrial

Output Device

SCR

Operating Temp Range

-40C to 100C

Rad Hardened

No

Operating Temperature-Min

-40 °C

Operating Temperature-Max

100 °C

Rohs Code

No

Part Life Cycle Code

Contact Manufacturer

Ihs Manufacturer

OPTO TWENTY-TWO (22)

Risk Rank

5.76

JESD-609 Code

e0

Termination

PCB

Terminal Finish

Tin/Lead (Sn/Pb)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

100 °C

Min Operating Temperature

-40 °C

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8541.40.95.00

Capacitance

8 pF

Subcategory

Solid State Relays

Depth

10.2 mm

Reach Compliance Code

compliant

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

1 A

Pin Count

a count of all of the component leads (or pins)

4

Approval Agency

CSA, UL

Output Voltage

200 V

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

200 V

Number of Circuits

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

200 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

5 V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

1 A

Input Type

DC

Overall Height

31 mm

Nominal Output Voltage

3.3 VDC, 6 VDC, 12 VDC, 24 VDC

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

1 A

Input Signal

input signal is the signal going into an electronic system.

5-200 VDC

Overall Length

43 mm

Output Circuit Type

BJT

Control Voltage

3 V

Input Voltage

200(V)

Height

24.9 mm

Length

43.2 mm

Width

10.2 mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free