Opto 22 240D25

Mount

Panel, Screw

Number of Pins

4

Mounting

Panel

Manufacturer

Opto 22

Manufacturer Part Number

240D25

Input Polarity

AC

Operating Temperature Classification

Industrial

Output Device

SCR

Operating Temp Range

-40C to 100C

Output Voltage (Max)

240(V)

Rad Hardened

No

Switching Mode

DC Switch

Approvals

CE, CSA, UL

RoHS

Compliant

Termination

Screw

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

100 °C

Min Operating Temperature

-40 °C

Capacitance

8 pF

Depth

57.2 mm

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

25 A

Pin Count

a count of all of the component leads (or pins)

4

Approval Agency

CE, CSA, UL

Output Voltage

280 V

Output Type

AC

Number of Circuits

1

Max Voltage Rating (AC)

280 V

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

25 A

Throw Configuration

SPST

Input Type

AC

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

240 V

Nominal Output Voltage

3.3 VDC, 6 VDC, 12 VDC, 24 VDC

Input Current

25 A

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

25 A

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

4 kV

Max Supply Voltage (AC)

280 V

Input Signal

input signal is the signal going into an electronic system.

24-280 VAC

Contact Configuration

-

Min Supply Voltage (AC)

24 V

Input Voltage

280(V)

Height

19.6 mm

Length

44.5 mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free