Maxim Integrated MAX4501CUK-T

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

SC-74A, SOT-753

Number of Pins

5

Weight

29.993795mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

50 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

1999

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

5

ECCN Code

EAR99

Resistance

250Ohm

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

571mW

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

240

Number of Functions

1

Supply Voltage

5V

Time@Peak Reflow Temperature-Max (s)

20

Base Part Number

MAX4501

Pin Count

a count of all of the component leads (or pins)

5

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

12V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2V

Operating Supply Current

1μA

Max Supply Current

1μA

Throw Configuration

SPST

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

75 ns

Supply Type

Single

On-State Resistance (Max)

250Ohm

Multiplexer/Demultiplexer Circuit

1:1

Off-state Isolation-Nom

100 dB

Current - Leakage (IS(off)) (Max)

1nA

Channel Capacitance (CS(off), CD(off))

3pF 3pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPST - NO

Switch Time (Ton, Toff) (Max)

75ns, 50ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

1pC

Voltage - Supply, Single (V+)

2V~12V

Normal Position

NO

Length

2.9mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead