Maxim Integrated MAX306CWI+

Factory Lead Time

6 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

28-SOIC (0.295, 7.50mm Width)

Number of Pins

28

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

300 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2006

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

28

ECCN Code

EAR99

Resistance

100Ohm

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1W

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

15V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

MAX306

Pin Count

a count of all of the component leads (or pins)

28

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

28V

Number of Channels

16

Number of Circuits

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

30V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

5V

Operating Supply Current

500μA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

16μA

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

300 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

600 ns

Logic Function

Multiplexer

Voltage - Supply, Single/Dual (±)

5V~30V ±4.5V~20V

Supply Type

Dual, Single

Neg Supply Voltage-Nom (Vsup)

-15V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

20V

On-State Resistance (Max)

100Ohm

Min Dual Supply Voltage

4.5V

Dual Supply Voltage

9V

Multiplexer/Demultiplexer Circuit

16:1

Off-state Isolation-Nom

69 dB

Current - Leakage (IS(off)) (Max)

500pA

Channel Capacitance (CS(off), CD(off))

8pF 130pF

On-state Resistance Match-Nom

1.5Ohm

Switch Time (Ton, Toff) (Max)

200ns, 150ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

2pC

Channel-to-Channel Matching (ΔRon)

1.5 Ω

Switching

BREAK-BEFORE-MAKE

Switch-on Time-Max

200ns

Signal Current-Max

0.03A

Height

2.35mm

Length

18.1mm

Width

7.6mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free