Maxim Integrated DG303ACJ+

Factory Lead Time

6 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

14-DIP (0.300, 7.62mm)

Number of Pins

14

Weight

1.620005g

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

250 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

0°C~70°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2005

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

Termination

Through Hole

ECCN Code

EAR99

Resistance

50Ohm

Terminal Finish

Matte Tin (Sn)

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

470mW

Peak Reflow Temperature (Cel)

260

Number of Functions

2

Supply Voltage

15V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

DG303A

Output

SEPARATE OUTPUT

Pin Count

a count of all of the component leads (or pins)

14

Number of Channels

4

Number of Circuits

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

30V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

10V

Operating Supply Current

230μA

Max Supply Current

500μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

300 ns

Supply Type

Dual, Single

Neg Supply Voltage-Nom (Vsup)

-15V

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

18V

On-State Resistance (Max)

50Ohm

Min Dual Supply Voltage

5V

Dual Supply Voltage

15V

Multiplexer/Demultiplexer Circuit

2:1

Off-state Isolation-Nom

62 dB

Current - Leakage (IS(off)) (Max)

5nA

Channel Capacitance (CS(off), CD(off))

14pF 14pF

Switch Circuit

establishes connections between links, on demand and as available, in order to establish an end-to-end circuit between devices.

SPDT

Switch Time (Ton, Toff) (Max)

300ns, 250ns

Charge Injection

A Charge injection in analog switches and multiplexers is a level change caused by stray capacitance associated with the NMOS and PMOS transistors that make up the analog switch.

12pC

Switching

BREAK-BEFORE-MAKE

Drain to Source Resistance

30Ohm

Voltage - Supply, Dual (V±)

±5V~18V

Height

4.45mm

Length

19.43mm

Width

7.87mm

REACH SVHC

Unknown

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free