Intersil (Renesas Electronics America) CA3130AE

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Lead, Tin

Mount

Through Hole

Package / Case

DIP

Number of Pins

8

Number of Elements

1

Published

1998

JESD-609 Code

e0

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued

Number of Terminations

8

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn/Pb)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-55°C

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

7.5V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Pin Count

a count of all of the component leads (or pins)

8

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

15V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

MILITARY

Voltage

18V

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

16V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

5V

Operating Supply Current

10mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

2mA

Slew Rate

the maximum rate of output voltage change per unit time.

30 V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

90 dB

Current - Input Bias

5pA

Output Current per Channel

45mA

Input Offset Voltage (Vos)

2mV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

15MHz

Neg Supply Voltage-Nom (Vsup)

-7.5V

Unity Gain BW-Nom

15000 kHz

Voltage Gain

100dB

Power Supply Rejection Ratio (PSRR)

73.97dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

NO

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

8V

Low-Bias

YES

Min Dual Supply Voltage

2.5V

Bias Current-Max (IIB) @25C

0.00003μA

Height Seated (Max)

5.33mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Contains Lead