ISL28158FBZ

Intersil (Renesas Electronics America) ISL28158FBZ

Part No:

ISL28158FBZ

Package:

SOIC

ROHS:

AINNX NO:

14629072-ISL28158FBZ

Description:

INTERSIL ISL28158FBZ Operational Amplifier, Single, 420 kHz, 1 Amplifier, 0.1 V/s, 2.4V to 5.5V, SOIC, 8 Pins

Products specifications
  • Mount
    Surface Mount
  • Package / Case
    SOIC
  • Number of Pins
    8
  • Weight
    540.001716mg
  • Published
    2005
  • JESD-609 Code
    e3
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Number of Terminations
    8
  • ECCN Code
    EAR99
  • Terminal Finish
    Matte Tin (Sn) - annealed
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    125°C
  • Min Operating Temperature
    -40°C
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    GULL WING
  • Peak Reflow Temperature (Cel)
    260
  • Number of Functions
    1
  • Supply Voltage
    5V
  • Time@Peak Reflow Temperature-Max (s)
    30
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    5V
  • Temperature Grade

    Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

    AUTOMOTIVE
  • Number of Circuits
    1
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    5.5V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    2.4V
  • Operating Supply Current
    34μA
  • Supply Current-Max
    0.055mA
  • Slew Rate

    the maximum rate of output voltage change per unit time.

    0.1 V/μs
  • Architecture
    VOLTAGE-FEEDBACK
  • Amplifier Type
    OPERATIONAL AMPLIFIER
  • Common Mode Rejection Ratio
    98 dB
  • Current - Input Bias
    1pA
  • Output Current per Channel
    30mA
  • Supply Type
    Dual, Single
  • Input Offset Voltage (Vos)
    3μV
  • Bandwidth
    420 kHz
  • Gain Bandwidth Product

    The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

    200 kHz
  • Unity Gain BW-Nom
    200 kHz
  • Voltage Gain
    106.85dB
  • Power Supply Rejection Ratio (PSRR)
    98dB
  • Low-Offset
    YES
  • Frequency Compensation

    Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

    YES
  • Max Dual Supply Voltage

    A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

    2.75V
  • Low-Bias
    YES
  • Micropower

    the use of very small electric generators and prime movers or devices to convert heat or motion to electricity, for use close to the generator.

    YES
  • -3db Bandwidth
    420 kHz
  • Min Dual Supply Voltage
    1.2V
  • Bias Current-Max (IIB) @25C
    0.00003μA
  • Programmable Power

    A programmable power supply provides remote control capability of the output voltage(s) via an analog control signal controlled by keypad or rotary switch from the front panel of the power supply or via a computer interface such as RS232, GPIB, or USB.

    NO
  • Input Voltage Noise Density
    64nV/sqrt Hz
  • Input Noise Current Density
    0.19pA/sqrt Hz
  • Height
    1.5mm
  • Length
    5mm
  • Width
    4mm
  • REACH SVHC
    No SVHC
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Intersil (Renesas Electronics America) ISL28158FBZ.