Intersil (Renesas Electronics America) CA3140E

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Lead, Tin

Mount

Through Hole

Package / Case

DIP

Number of Pins

8

Published

1998

JESD-609 Code

e0

Pbfree Code

no

ECCN Code

EAR99

Terminal Finish

Tin/Lead (Sn/Pb)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-55°C

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

1

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Pin Count

a count of all of the component leads (or pins)

8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

9V

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

MILITARY

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

36V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4V

Operating Supply Current

4mA

Supply Current-Max

6mA

Slew Rate

the maximum rate of output voltage change per unit time.

9 V/μs

Architecture

VOLTAGE-FEEDBACK

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

90 dB

Current - Input Bias

10pA

Output Current per Channel

40mA

Input Offset Voltage (Vos)

5mV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

3.7MHz

Neg Supply Voltage-Nom (Vsup)

-15V

Unity Gain BW-Nom

4500 kHz

Voltage Gain

100dB

Low-Offset

NO

Frequency Compensation

Frequency compensation is implemented by modifying the gain and phase characteristics of the amplifier's open loop output or of its feedback network, or both, in such a way as to avoid the conditions leading to oscillation. This is usually done by the internal or external use of resistance-capacitance networks.

YES

Max Dual Supply Voltage

A Dual power supply is a regular direct current power supply. It can provide a positive as well as negative voltage. It ensures stable power supply to the device as well as it helps to prevent system damage.

18V

Low-Bias

YES

Min Dual Supply Voltage

2V

Bias Current-Max (IIB) @25C

0.00005μA

Dual Supply Voltage

9V

Number of Amplifiers

1

Height

4.95mm

Length

10.16mm

Width

7.11mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant