Hamlin GDBAD741Z

Package / Case

Axial

Supplier Device Package

--

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

600V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 155°C

Series

SFR25H

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Size / Dimension

0.098 Dia x 0.256 L (2.50mm x 6.50mm)

Tolerance

±1%

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Number of Terminations

2

Temperature Coefficient

The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

±100ppm/°C

Type

Power Distribution Block

Resistance

7.15 kOhms

Composition

Metal Film

Power (Watts)

0.5W, 1/2W

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

335A

Failure Rate

the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

--

Number of Poles

1

Features

--

Load Side Connection Type

Applied when there are no circuit breaker slots available. The wires are connected directly to the existing wires, between the electrical panel and (on the load side of) the main breaker. Some utilities do not allow this connection or do so only if it is approved by a professional electrician.

Screw Connection

Line Side Connection Type

This method requires that the wires from the inverter are connected to the service wires on the line side of the circuit breaker. This connection is very rarely allowed for residential systems but is increasingly common in commercial systems. Utilities usually require that the design for this connection and the installation are approved by a professional electrician.

Screw Connection

Load Side Connections Per Pole

8

Line Side Wire/Stud Size

400MCM (kcmil) - #14CU/AL; 3/0 - #14CU/AL

Line Side Connections Per Pole

1

Load Side Wire/Stud Size

2 - #14CU/AL

Height Seated (Max)

--