Hamlin 0LS03032Z

Mounting Type

Surface Mount

Package / Case

PowerPAK® SC-70-6

Supplier Device Package

PowerPAK® SC-70-6 Single

Current - Continuous Drain (Id) @ 25℃

12A (Tc)

Drive Voltage (Max Rds On, Min Rds On)

1.5V, 4.5V

Power Dissipation (Max)

3.5W (Ta), 19W (Tc)

Lead Free Status / RoHS Status

Contains lead / RoHS non-compliant

Other Names

LS03032Z

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

600V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C ~ 150°C (TJ)

Series

TrenchFET®

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Type

Power Splicer Terminal Block

Technology

MOSFET (Metal Oxide)

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

310A

Number of Poles

2

FET Type

P-Channel

Rds On (Max) @ Id, Vgs

13.5 mOhm @ 7A, 4.5V

Vgs(th) (Max) @ Id

850mV @ 250µA

Input Capacitance (Ciss) (Max) @ Vds

2880pF @ 6V

Gate Charge (Qg) (Max) @ Vgs

80nC @ 8V

Drain to Source Voltage (Vdss)

12V

Vgs (Max)

±8V

FET Feature

--

Load Side Connection Type

Applied when there are no circuit breaker slots available. The wires are connected directly to the existing wires, between the electrical panel and (on the load side of) the main breaker. Some utilities do not allow this connection or do so only if it is approved by a professional electrician.

Screw Connection

Line Side Connection Type

This method requires that the wires from the inverter are connected to the service wires on the line side of the circuit breaker. This connection is very rarely allowed for residential systems but is increasingly common in commercial systems. Utilities usually require that the design for this connection and the installation are approved by a professional electrician.

Screw Connection

Load Side Connections Per Pole

1

Line Side Wire/Stud Size

350MCM (kcmil) - #6CU/AL

Line Side Connections Per Pole

1

Load Side Wire/Stud Size

350MCM (kcmil) - #6CU/AL