Hamlin 0LS33203Z

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Supplier Device Package

8-SO

Current - Continuous Drain (Id) @ 25℃

8A

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

600V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-50°C ~ 150°C (TJ)

Series

TrenchFET®

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Type

Power Splicer Terminal Block

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

510A

Base Part Number

SI4943

Number of Poles

3

Power - Max

3.1W

FET Type

2 P-Channel (Dual)

Rds On (Max) @ Id, Vgs

19.2 mOhm @ 8.3A, 10V

Vgs(th) (Max) @ Id

3V @ 250µA

Input Capacitance (Ciss) (Max) @ Vds

1945pF @ 10V

Gate Charge (Qg) (Max) @ Vgs

62nC @ 10V

Drain to Source Voltage (Vdss)

20V

FET Feature

Logic Level Gate

Load Side Connection Type

Applied when there are no circuit breaker slots available. The wires are connected directly to the existing wires, between the electrical panel and (on the load side of) the main breaker. Some utilities do not allow this connection or do so only if it is approved by a professional electrician.

Screw Connection

Line Side Connection Type

This method requires that the wires from the inverter are connected to the service wires on the line side of the circuit breaker. This connection is very rarely allowed for residential systems but is increasingly common in commercial systems. Utilities usually require that the design for this connection and the installation are approved by a professional electrician.

Screw Connection

Load Side Connections Per Pole

2

Line Side Wire/Stud Size

250MCM (kcmil) - #6CU/AL

Line Side Connections Per Pole

2

Load Side Wire/Stud Size

250MCM (kcmil) - #6CU/AL