Analog Devices Inc. AD829JR

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Lead, Tin

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

8

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e0

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

ECCN Code

EAR99

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

70°C

Min Operating Temperature

0°C

Applications

Voltage Feedback

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

900mW

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

240

Number of Functions

1

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

AD829

Pin Count

a count of all of the component leads (or pins)

8

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

COMMERCIAL

Number of Channels

1

Operating Supply Current

5.3mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

5mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

900mW

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

6.5mA

Slew Rate

the maximum rate of output voltage change per unit time.

230V/μs

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

120 dB

Voltage - Supply, Single/Dual (±)

±4.5V~18V

Output Current per Channel

32mA

Supply Type

Dual

Input Offset Voltage (Vos)

200μV

Bandwidth

120MHz

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

300MHz

Voltage Gain

96.26dB

Power Supply Rejection Ratio (PSRR)

98dB

Dual Supply Voltage

5V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

1.5pF

Input Bias Current

3.3μA

Height

1.5mm

Length

5mm

Width

4mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

Non-RoHS Compliant

Lead Free

Contains Lead