Analog Devices Inc. AD829JNZ

Lifecycle Status

PRODUCTION (Last Updated: 3 months ago)

Factory Lead Time

8 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

NO

Number of Pins

8

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

JESD-609 Code

e3

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

Termination

Through Hole

ECCN Code

EAR99

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125°C

Min Operating Temperature

-55°C

Applications

Voltage Feedback

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

1.3W

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

NOT APPLICABLE

Number of Functions

1

Supply Voltage

15V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Time@Peak Reflow Temperature-Max (s)

NOT APPLICABLE

Base Part Number

AD829

Pin Count

a count of all of the component leads (or pins)

8

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

COMMERCIAL

Number of Channels

1

Operating Supply Current

6.5mA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

5mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

1.3W

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

32mA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

5.3mA

Slew Rate

the maximum rate of output voltage change per unit time.

230V/μs

Amplifier Type

OPERATIONAL AMPLIFIER

Common Mode Rejection Ratio

120 dB

Voltage - Supply, Single/Dual (±)

±4.5V~18V

Output Current per Channel

32mA

Input Offset Voltage (Vos)

1mV

Gain Bandwidth Product

The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.

300MHz

Neg Supply Voltage-Nom (Vsup)

-15V

Voltage Gain

96.26dB

Power Supply Rejection Ratio (PSRR)

120dB

Settling Time

In control theory the settling time of a dynamical system such as an amplifier or other output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band.

65 ns

-3db Bandwidth

120MHz

Dual Supply Voltage

9V

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

1.5pF

Input Bias Current

3.3μA

Height

3.43mm

Length

9.27mm

Width

7.24mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead