AD829JRZ-REEL7
8-SOIC (0.154, 3.90mm Width)
6162147-AD829JRZ-REEL7
OP Amp Single GP ±18V 8-Pin SOIC N T/R
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
a count of all of the component leads (or pins)
Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.
the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.
The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.
the maximum rate of output voltage change per unit time.
The gain–bandwidth product (designated as GBWP, GBW, GBP, or GB) for an amplifier is the product of the amplifier's bandwidth and the gain at which the bandwidth is measured.
In control theory the settling time of a dynamical system such as an amplifier or other output device is the time elapsed from the application of an ideal instantaneous step input to the time at which the amplifier output has entered and remained within a specified error band.
The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.