Vishay Semiconductor Opto Division VO3150A

Factory Lead Time

6 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Supplier Device Package

8-DIP

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~110°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2009

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

110°C

Min Operating Temperature

-40°C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

295mW

Approval Agency

cUR, UR

Voltage - Isolation

5300Vrms

Output Voltage

500mV

Max Output Current

The maximum current that can be supplied to the load.

500mA

Number of Channels

1

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

500mA

Voltage - Forward (Vf) (Typ)

1.3V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

400 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

400 ns

Forward Current

Current which flows upon application of forward voltage.

25mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

500mV

Direction

Unidirectional

Output Current per Channel

500mA

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

100ns

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.3V

Fall Time (Typ)

100 ns

Rise / Fall Time (Typ)

100ns 100ns

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

500mA

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

500mA

Current - DC Forward (If) (Max)

25mA

Input Current

16mA

Propagation Delay tpLH / tpHL (Max)

400ns, 400ns

Common Mode Transient Immunity (Min)

25kV/μs

Reverse Voltage (DC)

5V

Pulse Width Distortion (PWD)

200 ns

Pulse Width Distortion (Max)

200ns

Voltage - Output Supply

15V~32V

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free