Vishay VO3063

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Through Hole

Number of Pins

6

Approvals

CSA, UL, UR, VDE

Case/Package

DIP

Number of Elements

1

RoHS

Compliant

Schedule B

8541408000, 8541408000|8541408000, 8541408000|8541408000|8541408000, 8541408000|8541408000|8541408000|8541408000

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

100 °C

Min Operating Temperature

-40 °C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

300 mW

Output Voltage

600 V

Max Output Current

The maximum current that can be supplied to the load.

100 mA

Number of Channels

1

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

300 mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

100 mA

Forward Current

Current which flows upon application of forward voltage.

60 mA

Max Input Voltage

1.5 V

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.2 V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

1.2 V

RMS Current (Irms)

100 mA

Power Consumption

Power consumption is the amount of input energy (measured in watts) required for an electrical appliance to function. This is opposed to power output which is a measure of the level of performance, of a heat pump for example.

100 mW

Reverse Breakdown Voltage

6 V

Hold Current

the minimum current which must pass through a circuit in order for it to remain in the 'ON' state.

200 µA

Input Current

30 mA

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

5.3 kV

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

REACH SVHC

Unknown

Lead Free

Lead Free