Vishay IL300-F

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

PCB, Through Hole

Number of Pins

8

Case/Package

DIP

Fall Time

1.75 µs

Number of Elements

1

RoHS

Compliant

Schedule B

8541408000, 8541408000|8541408000, 8541408000|8541408000|8541408000, 8541408000|8541408000|8541408000|8541408000

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

100 °C

Min Operating Temperature

-55 °C

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

210 mW

Output Voltage

500 mV

Number of Channels

1

Voltage

5 V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

150 mW

Forward Current

Current which flows upon application of forward voltage.

10 mA

Max Output Voltage

The maximum output voltage refers to the dynamic area beyond which the output is saturated in the positive or negative direction, and is limited according to the load resistance value.

500 mV

Output Current per Channel

70 µA

Bandwidth

200 kHz

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

1.75 µs

Forward Voltage

the amount of voltage needed to get current to flow across a diode.

1.4 V

Reverse Breakdown Voltage

5 V

Reverse Voltage

the voltage drop across the diode if the voltage at the cathode is more positive than the voltage at the anode

5 V

Max Input Current

60 mA

Input Current

10 mA

Isolation Voltage

Isolation voltage refers to a test of the ability of an insulator to minimize the flow of electric current with a high applied voltage.

4.42 kV

Max Junction Temperature (Tj)

125 °C

Reverse Voltage (DC)

5 V

Ambient Temperature Range High

This varies from person to person, but it is somewhere between 68 and 77 degrees F on average. The temperature setting that is comfortable for an individual may fluctuate with humidity and outside temperature as well. The temperature of an air conditioned room can also be considered ambient temperature.

100 °C

Current Transfer Ratio

Current Transfer Ratio (CTR) is the gain of the optocoupler. It is the ratio of the phototransistor collector current to the IRED forward current. CTR = (IC / IF) * 100 It is expressed as a percentage (%).

1.1 %

Height

4.55 mm

Length

10.16 mm

Width

6.6 mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

REACH SVHC

Unknown

Lead Free

Lead Free