STMicroelectronics ST16C32245TBR

Mounting Type

Surface Mount

Package / Case

42-TFBGA

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

42

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

JESD-609 Code

e0

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

42

Terminal Finish

TIN LEAD

Packing Method

TAPE AND REEL

Terminal Position

BOTTOM

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

BALL

Number of Functions

1

Supply Voltage

1.8V

Terminal Pitch

The center distance from one pole to the next.

0.5mm

Base Part Number

ST16C

Pin Count

a count of all of the component leads (or pins)

42

Output Type

Non-Inverted

Polarity

Non-Inverting

Number of Circuits

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.3V

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

30pF

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

2

Number of Bits

14

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

100 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

6.2 ns

Family

CMOS

Logic Function

Transceiver, Translator

Output Characteristics

3-STATE WITH SERIES RESISTOR

Logic IC Type

BUS TRANSCEIVER

Max I(ol)

0.006 A

Prop. Delay@Nom-Sup

5.8 ns

High Level Output Current

High-level Output Current IOH The current flowing into the output at a specified high- level voltage. Low-level Output Current IOL The current flowing into the output at a specified low- level output voltage.

-8mA

Channel Type

Bidirectional

Low Level Output Current

The current into the output terminal with input conditions applied that, according to the product specification, will establish a low level at the output.

8mA

Control Type

COMMON CONTROL

Translation

N/A

Translator Type

Voltage Level

Voltage - VCCA

2.3V~3.6V

Voltage - VCCB

1.65V~2.7V

Channels per Circuit

2, 12

Features

Power-Off Protection

Length

4mm

Height Seated (Max)

1.16mm

Width

3.5mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant