HCF4010YM013TR
16-SOIC (0.154, 3.90mm Width)
5614586-HCF4010YM013TR
IC TRNSLTR UNIDIRECTIONAL 16SO
having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.
The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.
Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.
Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.
The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.
Occurring at or forming the end of a series, succession, or the like; closing; concluding.
a count of all of the component leads (or pins)
In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.
The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.
the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.
Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.
the flight time of packets over the transmission link and is limited by the speed of light.
The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.
Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.
RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.