Standex-Meder Electronics MK02/0-1A66-500W

Factory Lead Time

12 Weeks

Mount

Flanges

Package / Case

Molded Body

Actuator Material

In smart material system, actuator materials have the ability to change the shape, stiffness, position, natural frequency, damping and/or other mechanical characteristics of the smart material systems in response to changes in temperature, electric field and/or magnetic field.

Magnet

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C~80°C TA

Series

MK02

Published

2003

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Termination

Cable

Type

Reed Switch

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

IT ALSO OPERATES AT -5 TO 80 DEGREE CENTIGRADE

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

1.25A

Termination Style

Cable Leads

Body Breadth

16.8 mm

Output Type

SPST-NO

Lead Length

500mm

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

200V

Supply Voltage-Max (Vsup)

180V

Contact Resistance

150mOhm

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

500mA

Throw Configuration

SPST

Max Voltage Rating (DC)

200V

Response Time

the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

100 µs

Switching Voltage

The maximum switching voltage of a relay is the maximum voltage that can be across the contacts whether the relay is open or closed. Operating a relay with high voltages present can cause arcing, and this in turn erodes the contacts and eventually degrades contact performance.

200V

Sensing Method

Magnetic

Housing

PBT GLASS FIBRE REINFORCED

Measurement Range-Max

10 mm

Measurement Range-Min

4.5 mm

Width

32.4mm

Body Height

10mm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant