MK21P-1A66B-500W

Standex-Meder Electronics MK21P-1A66B-500W

Part No:

MK21P-1A66B-500W

Package:

Molded Body

ROHS:

AINNX NO:

7540572-MK21P-1A66B-500W

Description:

STANDEXMEDER MK21P-1A66B-500W REED SENSOR, 10W

Products specifications
  • Factory Lead Time
    12 Weeks
  • Mount
    Surface Mount
  • Package / Case
    Molded Body
  • Actuator Material

    In smart material system, actuator materials have the ability to change the shape, stiffness, position, natural frequency, damping and/or other mechanical characteristics of the smart material systems in response to changes in temperature, electric field and/or magnetic field.

    Magnet
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -30°C~150°C TA
  • Series
    MK21
  • Published
    2006
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    1 (Unlimited)
  • Termination
    Wire Leads
  • Type
    Reed Switch
  • Termination Style
    Wire Leads
  • Output Type
    SPST-NO
  • Lead Length
    500mm
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    200V
  • Contact Resistance
    150mOhm
  • Insulation Resistance

    The measurement of insulation resistance is carried out by means of a megohmmeter – high resistance range ohmmeter. A general rule-of-thumb is 10 Megohm or more.

    100MOhm
  • Operating Supply Current
    1.25A
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    500mA
  • Max Voltage Rating (DC)
    200V
  • Response Time

    the time taken for a circuit or measuring device, when subjected to a change in input signal, to change its state by a specified fraction of its total response to that change.

    100 µs
  • Switching Voltage

    The maximum switching voltage of a relay is the maximum voltage that can be across the contacts whether the relay is open or closed. Operating a relay with high voltages present can cause arcing, and this in turn erodes the contacts and eventually degrades contact performance.

    200V
  • Sensing Method
    Magnetic
  • Housing
    CRASTIN SK655FR1
  • Must Operate
    10 ~ 60AT
  • Must Release
    4 ~ 54AT
  • Height
    6.35mm
  • Length
    28.6mm
  • Width
    19mm
  • REACH SVHC
    No SVHC
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    ROHS3 Compliant
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Standex-Meder Electronics MK21P-1A66B-500W.