Silicon Labs TSM1285BESA+

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tray

Published

2015

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Reach Compliance Code

unknown

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3.3V

Polarity

Unipolar

Configuration

S/H-ADC

Number of Channels

1

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

3.6V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

2.7V

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

471mW

Number of Bits

12

Input Type

Single Ended

Architecture

SAR

Converter Type

ADC, SUCCESSIVE APPROXIMATION

Reference Type

a code object that is not stored directly where it is created, but that acts as a kind of pointer to a value stored elsewhere.

Internal

Data Interface

A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

SPI

Resolution

1.5 B

Sampling Rate

often described in the context of signal processing as the number of samples per time.

300 ksps

Voltage - Supply, Analog

2.7V~3.6V

Voltage - Supply, Digital

2.7V~3.6V

Sampling Rate (Per Second)

300k

Output Bit Code

OFFSET BINARY

Power Consumption

Power consumption is the amount of input energy (measured in watts) required for an electrical appliance to function. This is opposed to power output which is a measure of the level of performance, of a heat pump for example.

471mW

Integral Nonlinearity (INL)

1 LSB

Ratio - S/H:ADC

1:1

Signal to Noise Ratio (SNR)

70 dB

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free