SI8900B-A01-GS

Silicon Labs SI8900B-A01-GS

Part No:

SI8900B-A01-GS

Manufacturer:

Silicon Labs

Datasheet:

Si890x

Package:

16-SOIC (0.295, 7.50mm Width)

ROHS:

AINNX NO:

7704599-SI8900B-A01-GS

Description:

IC ADC 10BIT SRL/UART SOIC

Products specifications
  • Factory Lead Time
    8 Weeks
  • Mounting Type
    Surface Mount
  • Package / Case
    16-SOIC (0.295, 7.50mm Width)
  • Surface Mount

    having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

    YES
  • Number of Pins
    16
  • Weight
    665.986997mg
  • Manufacturer Package Identifier
    WB SOIC
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C~85°C
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tube
  • Published
    1999
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Moisture Sensitivity Level (MSL)
    3 (168 Hours)
  • Number of Terminations
    16
  • Terminal Position
    DUAL
  • Terminal Form

    Occurring at or forming the end of a series, succession, or the like; closing; concluding.

    GULL WING
  • Number of Functions
    1
  • Supply Voltage
    3.3V
  • Base Part Number
    SI890
  • Configuration
    MUX-PGA-ADC
  • Interface
    2-Wire, UART
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    5.5V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    2.7V
  • Operating Supply Current
    4.4mA
  • Number of Bits
    10
  • Input Type
    Single Ended
  • Architecture
    SAR
  • Number of Inputs
    3
  • Converter Type
    ADC, SUCCESSIVE APPROXIMATION
  • Reference Voltage

    A voltage reference is an electronic device that ideally produces a fixed (constant) voltage irrespective of the loading on the device, power supply variations, temperature changes, and the passage of time. Voltage references are used in power supplies, analog-to-digital converters, digital-to-analog converters, and other measurement and control systems. Voltage references vary widely in performance; a regulator for a computer power supply may only hold its value to within a few percent of the nominal value, whereas laboratory voltage standards have precisions and stability measured in parts per million.

    3.6V
  • Reference Type

    a code object that is not stored directly where it is created, but that acts as a kind of pointer to a value stored elsewhere.

    External, Internal
  • Data Interface

    A Data Interface in EDQ is a template of a set of attributes representing a given entity, used to create processes that read from, or write to, interfaces rather than directly from or to sources or targets of data.

    UART
  • Resolution
    1.25 B
  • Voltage - Supply, Analog
    2.7V~3.6V
  • Voltage - Supply, Digital
    2.7V~3.6V
  • Number of Analog In Channels
    3
  • Output Bit Code
    BINARY
  • Linearity Error-Max (EL)
    0.0977%
  • Integral Nonlinearity (INL)
    1 LSB
  • Number of A/D Converters
    1
  • Output Format

    Output formats are used to determine which data is exported and how data is displayed in many areas of OLIB.

    SERIAL
  • Differential Nonlinearity
    1 LSB
  • Features
    PGA
  • Height
    2.35mm
  • Length
    10.3mm
  • Width
    7.5mm
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • RoHS Status

    RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

    RoHS Compliant
0 Similar Products Remaining
Documents & Media Download datasheets and manufacturer documentation for Silicon Labs SI8900B-A01-GS.