Sharp Microelectronics S2S3LB0F

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

4-SMD

Number of Pins

4

Current-Hold(Ih)

3.5mA

Current-LED Trigger(Ift)(Max)

5mA

Number of Elements

1

Zero-Crossing Circuit

No

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2004

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

UL RECOGNIZED

Approval Agency

CSA, UR

Voltage - Isolation

3750Vrms

Output Voltage

600V

Output Type

Triac

Max Output Current

The maximum current that can be supplied to the load.

50mA

Configuration

SINGLE

Number of Channels

1

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

50mA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

100 μs

Forward Current

Current which flows upon application of forward voltage.

50mA

Max Input Voltage

1.4V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

100μs

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

1.2V

RMS Current (Irms)

50mA

Reverse Breakdown Voltage

6V

Max Input Current

50mA

Hold Current

the minimum current which must pass through a circuit in order for it to remain in the 'ON' state.

3.5mA

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

100μs (Max)

Input Current

20mA

On-State Current-Max

0.05A

Static dV/dt (Min)

100V/μs

Input Trigger Current-Nom

5mA

Width

3.6mm

REACH SVHC

Unknown

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free