Sharp Microelectronics PC3SD12NTZAF

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

6-DIP (0.300, 7.62mm), 5 Leads

Number of Pins

5

Current-Hold(Ih)

3.5mA

Current-LED Trigger(Ift)(Max)

10mA

Number of Elements

1

Voltage-Off State

600V

Zero-Crossing Circuit

No

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-30°C~100°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2004

JESD-609 Code

e2

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Terminal Finish

Tin/Copper (Sn/Cu)

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

UL RECOGNIZED

Approval Agency

CSA, UR

Voltage - Isolation

5000Vrms

Output Voltage

420V

Output Type

Triac

Max Output Current

The maximum current that can be supplied to the load.

100mA

Configuration

SINGLE

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

100mA

Voltage - Forward (Vf) (Typ)

1.2V

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

50 μs

Forward Current

Current which flows upon application of forward voltage.

50mA

Max Input Voltage

1.4V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

1.2V

RMS Current (Irms)

100mA

Reverse Breakdown Voltage

6V

Max Input Current

50mA

Hold Current

the minimum current which must pass through a circuit in order for it to remain in the 'ON' state.

3.5mA

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

50μs (Max)

Static dV/dt (Min)

1kV/μs

Input Trigger Current-Nom

10mA

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free