ON Semiconductor NC7SZ175P6X

Lifecycle Status

ACTIVE (Last Updated: 6 days ago)

Factory Lead Time

5 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

6-TSSOP, SC-88, SOT-363

Number of Pins

6

Weight

28mg

Manufacturer Package Identifier

NC7SZ175P6X

Clock-Edge Trigger Type

Positive Edge

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

7SZ

Published

2004

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

6

ECCN Code

EAR99

Type

D-Type

Terminal Finish

Nickel/Palladium/Gold (Ni/Pd/Au)

Packing Method

TAPE AND REEL

Voltage - Supply

1.65V~5.5V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Supply Voltage

1.8V

Base Part Number

7SZ175

Function

Reset

Output Type

Non-Inverted

Polarity

Non-Inverting

Supply Voltage-Max (Vsup)

5.5V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3.3V

Number of Channels

1

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

32mA

Number of Bits

1

Clock Frequency

175MHz

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

16.5 ns

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

1μA

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

9.8 ns

Family

LVC/LCX/Z

Logic Function

D-Type, Flip-Flop

Max I(ol)

0.024 A

Max Propagation Delay @ V, Max CL

4ns @ 5V, 50pF

Trigger Type

Positive Edge

Input Capacitance

The capacitance between the input terminals of an op amp with either input grounded. It is expressed in units of farads.

3pF

Number of Output Lines

1

Height

1.1mm

Length

2mm

Width

1.25mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free