IP4251CZ12-6-TTL,1

NXP USA Inc. IP4251CZ12-6-TTL,1

Part No:

IP4251CZ12-6-TTL,1

Manufacturer:

NXP USA Inc.

Datasheet:

-

Package:

12-UFDFN Exposed Pad

AINNX NO:

27272829-IP4251CZ12-6-TTL,1

Description:

IP4251/52/53/54-TTL - Integrated 4-, 6- and 8-channel passive filter network with ESD protection DFN 12-Pin

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    12-UFDFN Exposed Pad
  • Package
    Bulk
  • Mfr
    NXP USA Inc.
  • Product Status
    Obsolete
  • Resistance - Channel (Ohms)
    100
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    -
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 85°C
  • Series
    -
  • Size / Dimension
    0.098 L x 0.053 W (2.50mm x 1.35mm)
  • Type
    Low Pass
  • Applications
    LAN, WAN
  • Technology
    RC (Pi)
  • Number of Channels
    6
  • ESD Protection
    Yes
  • Attenuation Value

    Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors. It may cause signals to become distorted or indiscernible.

    16dB @ 800MHz ~ 3GHz
  • Filter Order

    The order of a filter also indicates the minimum number of reactive components that the filter will require. For example, a third-order filter requires at least three reactive components one capacitor and two inductors, two capacitors and one inductor, or in the case of an active filter, three capacitors.

    2nd
  • Values
    R = 100Ohms, C = 10pF (Total)
  • Center / Cutoff Frequency
    -
  • Height
    0.022 (0.55mm)
0 Similar Products Remaining