IP3253CZ16-8-TTL,1

NXP USA Inc. IP3253CZ16-8-TTL,1

Part No:

IP3253CZ16-8-TTL,1

Manufacturer:

NXP USA Inc.

Datasheet:

-

Package:

16-UFDFN Exposed Pad

AINNX NO:

27207536-IP3253CZ16-8-TTL,1

Description:

IP3253/IP3254-TTL - Integrated 4-, 6- and 8-channel passive EMI-filter network with high-level ESD protection DFN 16-Pin

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    16-UFDFN Exposed Pad
  • Package
    Bulk
  • Mfr
    NXP USA Inc.
  • Product Status
    Active
  • Resistance - Channel (Ohms)
    8
  • Voltage Rated

    RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

    -
  • Manufacturer Package Code
    SOT1168-1
  • Manufacturer Part Number
    IP3253CZ16-8-TTL,1
  • Manufacturer
    Nexperia
  • Part Life Cycle Code
    Obsolete
  • Ihs Manufacturer
    NEXPERIA
  • Risk Rank
    5.7
  • Part Package Code
    DFN
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 85°C
  • Series
    -
  • Size / Dimension
    0.130 L x 0.053 W (3.30mm x 1.35mm)
  • Type
    Low Pass
  • Applications
    GSM, LAN, PCS, WAN
  • Technology
    LC (Pi)
  • Reach Compliance Code
    compliant
  • Pin Count

    a count of all of the component leads (or pins)

    16
  • Brand Name
    Nexperia
  • Number of Channels
    8
  • Current
    30 mA
  • ESD Protection
    Yes
  • Attenuation Value

    Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors. It may cause signals to become distorted or indiscernible.

    30dB @ 1GHz ~ 4GHz
  • Filter Order

    The order of a filter also indicates the minimum number of reactive components that the filter will require. For example, a third-order filter requires at least three reactive components one capacitor and two inductors, two capacitors and one inductor, or in the case of an active filter, three capacitors.

    3rd
  • Values
    L = 18nH (Total), C = 25pF (Total)
  • Center / Cutoff Frequency
    175MHz (Cutoff)
  • Height
    0.022 (0.55mm)
0 Similar Products Remaining