NXP USA Inc. 74LV125D,118

Mounting Type

Surface Mount

Package / Case

14-SOIC (0.154, 3.90mm Width)

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Elements

4

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

74LV

Published

2009

JESD-609 Code

e4

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

14

Terminal Finish

NICKEL PALLADIUM GOLD

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

TYPICAL VOLP < 0.8V AT VCC = 3.3V, TA = 25 DEGREE C

Packing Method

TAPE AND REEL

Voltage - Supply

1V~5.5V

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

260

Number of Functions

4

Supply Voltage

3.3V

Time@Peak Reflow Temperature-Max (s)

30

Base Part Number

74LV125

Pin Count

a count of all of the component leads (or pins)

14

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Output Type

3-State

Supply Voltage-Max (Vsup)

5.5V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

3.3V

Supply Voltage-Min (Vsup)

1V

Load Capacitance

the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

50pF

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

2

Family

LV/LV-A/LVX/H

Logic Type

Buffer, Non-Inverting

Output Polarity

TRUE

Max I(ol)

0.008 A

Number of Bits per Element

1

Control Type

ENABLE LOW

Length

8.65mm

Width

3.9mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant