Microsemi Corporation APT7F120B

Factory Lead Time

22 Weeks

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

TO-247-3

Weight

38.000013g

Transistor Element Material

SILICON

Current - Continuous Drain (Id) @ 25℃

7A Tc

Drive Voltage (Max Rds On, Min Rds On)

10V

Number of Elements

1

Power Dissipation (Max)

335W Tc

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

45 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-55°C~150°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

1997

JESD-609 Code

e1

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

3

Resistance

2.4Ohm

Terminal Finish

TIN SILVER COPPER

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

AVALANCHE RATED

Voltage - Rated DC

1.2kV

Terminal Position

SINGLE

Current Rating

Current rating is the maximum current that a fuse will carry for an indefinite period without too much deterioration of the fuse element.

6.6A

Pin Count

a count of all of the component leads (or pins)

3

JESD-30 Code

R-PSFM-T3

Configuration

SINGLE WITH BUILT-IN DIODE

Operating Mode

A phase of operation during the operation and maintenance stages of the life cycle of a facility.

ENHANCEMENT MODE

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

335W

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

14 ns

FET Type

N-Channel

Transistor Application

SWITCHING

Rds On (Max) @ Id, Vgs

2.9 Ω @ 3A, 10V

Vgs(th) (Max) @ Id

5V @ 1mA

Input Capacitance (Ciss) (Max) @ Vds

2565pF @ 25V

Gate Charge (Qg) (Max) @ Vgs

80nC @ 10V

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

8ns

Drain to Source Voltage (Vdss)

1200V

Vgs (Max)

±30V

Fall Time (Typ)

13 ns

Continuous Drain Current (ID)

7A

JEDEC-95 Code

TO-247AB

Gate to Source Voltage (Vgs)

30V

Drain Current-Max (Abs) (ID)

7A

Pulsed Drain Current-Max (IDM)

28A

Avalanche Energy Rating (Eas)

575 mJ

Height

5.31mm

Length

21.46mm

Width

16.26mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant

Lead Free

Lead Free