Microchip Technology AT24C16C-PUM

Factory Lead Time

12 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Tin

Mount

Through Hole

Mounting Type

Through Hole

Package / Case

8-DIP (0.300, 7.62mm)

Number of Pins

8

Memory Types

Non-Volatile

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tube

Published

2005

JESD-609 Code

e3

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

8

Voltage - Supply

1.7V~5.5V

Terminal Position

DUAL

Number of Functions

1

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

2.54mm

Base Part Number

AT24C16C

Supply Voltage-Max (Vsup)

5.5V

Supply Voltage-Min (Vsup)

1.7V

Interface

2-Wire, I2C, Serial

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

16Kb 2K x 8

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3mA

Clock Frequency

1MHz

Access Time

550ns

Memory Format

EEPROM

Memory Interface

An external memory interface is a bus protocol for communication from an integrated circuit, such as a microprocessor, to an external memory device located on a circuit board.

I2C

Write Cycle Time - Word, Page

5ms

Density

16 kb

Serial Bus Type

I2C

Write Cycle Time-Max (tWC)

5ms

Height

4.953mm

Length

10.16mm

Width

7.112mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant