Microchip Technology AT24C01C-SSHM-T

Factory Lead Time

7 Weeks

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Gold

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Memory Types

Non-Volatile

Usage Level

Automotive grade

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TA

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

1997

JESD-609 Code

e4

Pbfree Code

yes

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

8

Additional Feature

Any Feature, including a modified Existing Feature, that is not an Existing Feature.

ALSO HAS 1 MHZ CLOCK FREQ AT 2.5V AND 5V SUPPLY

Voltage - Supply

1.7V~5.5V

Terminal Position

DUAL

Peak Reflow Temperature (Cel)

260

Number of Functions

1

Supply Voltage

2.5V

Terminal Pitch

The center distance from one pole to the next.

1.27mm

Time@Peak Reflow Temperature-Max (s)

40

Base Part Number

AT24C01

Supply Voltage-Max (Vsup)

5.5V

Supply Voltage-Min (Vsup)

1.7V

Interface

2-Wire, I2C, Serial

Memory Size

The memory capacity is the amount of data a device can store at any given time in its memory.

1Kb 128 x 8

Number of Ports

A port is identified for each transport protocol and address combination by a 16-bit unsigned number,.

1

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3mA

Clock Frequency

1MHz

Access Time

550ns

Memory Format

EEPROM

Memory Interface

An external memory interface is a bus protocol for communication from an integrated circuit, such as a microprocessor, to an external memory device located on a circuit board.

I2C

Output Characteristics

OPEN-DRAIN

Write Cycle Time - Word, Page

5ms

Density

1 kb

Standby Current-Max

0.000006A

Screening Level

ISO/TS-16949

Serial Bus Type

I2C

Endurance

1000000 Write/Erase Cycles

Write Cycle Time-Max (tWC)

5ms

Data Retention Time-Min

100

Write Protection

HARDWARE

Data Polling

YES

Reverse Pinout

NO

Height

1.5mm

Length

5.05mm

Width

3.99mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free