International Rectifier IRS2540SPBF

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-SOIC (0.154, 3.90mm Width)

Number of Pins

8

Supplier Device Package

8-SOIC

RoHS

Compliant

SwitchingFrequency

500 kHz

Package

Bulk

Base Product Number

IRS2540SPBF

Mfr

International Rectifier

Product Status

Active

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-25°C ~ 150°C (TJ)

Series

-

Termination

SMD/SMT

Type

DC DC Controller

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

125 °C

Min Operating Temperature

-25 °C

Applications

-

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

625 mW

Frequency

500 kHz

Number of Outputs

1

Output Voltage

16.8 V

Max Output Current

The maximum current that can be supplied to the load.

500 mA

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

14 V

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

14.25 V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

13.75 V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

10 mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

625 mW

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

500 mA

Max Supply Current

10 mA

Quiescent Current

The quiescent current is defined as the current level in the amplifier when it is producing an output of zero.

1 mA

Voltage - Output

-

Topology

Step-Down (Buck)

Min Input Voltage

9 V

Max Input Voltage

15.6 V

Output Current per Channel

500 mA

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

50 ns

Release Time

In telecommunication, release time is the time interval for a circuit to respond when an enabling signal is discontinued

30 ns

Current - Output / Channel

-

Internal Switch(s)

No

Dimming

PWM

Number of Segments

2

Voltage - Supply (Max)

15.6V

Voltage - Supply (Min)

9V

Width

4 mm

Height

1.5 mm

Length

5 mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

Lead Free

Lead Free