IRS25401SPBF

International Rectifier IRS25401SPBF

Part No:

IRS25401SPBF

Datasheet:

-

Package:

1210 (3225 Metric)

AINNX NO:

35786422-IRS25401SPBF

Description:

200V Half Bridge Driver LED Buck Regulator in a 8-Lead SOIC Package

Products specifications
  • Package / Case
    1210 (3225 Metric)
  • Mount
    Surface Mount
  • Mounting Type
    Surface Mount
  • Number of Pins
    8
  • Supplier Device Package
    1210
  • Package
    Tape & Reel (TR);Cut Tape (CT);Digi-Reel®;
  • Base Product Number
    RN73H2E
  • Mfr
    KOA Speer Electronics, Inc.
  • Product Status
    Active
  • RoHS
    Compliant
  • SwitchingFrequency
    500 kHz
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -55°C ~ 155°C
  • Series
    RN73H
  • Size / Dimension
    0.126 L x 0.098 W (3.20mm x 2.50mm)
  • Tolerance
    ±1%
  • Number of Terminations
    2
  • Temperature Coefficient

    The resistance-change factor per degree Celsius of temperature change is called the temperature coefficient of resistance. This factor is represented by the Greek lower-case letter “alpha” (α). A positive coefficient for a material means that its resistance increases with an increase in temperature.

    ±100ppm/°C
  • Type
    DC DC Controller
  • Resistance
    43.7 Ohms
  • Max Operating Temperature

    The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

    125 °C
  • Min Operating Temperature
    -25 °C
  • Composition
    Metal Film
  • Applications
    -
  • Power (Watts)
    0.25W, 1/4W
  • Max Power Dissipation

    The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

    625 mW
  • Frequency
    500 kHz
  • Number of Outputs
    1
  • Output Voltage
    16.6 V
  • Operating Supply Voltage

    The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

    14 V
  • Failure Rate

    the frequency with which an engineered system or component fails, expressed in failures per unit of time. It is usually denoted by the Greek letter λ (lambda) and is often used in reliability engineering.

    -
  • Max Supply Voltage

    In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

    14.25 V
  • Min Supply Voltage

    The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

    13.75 V
  • Nominal Supply Current

    Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

    10 mA
  • Power Dissipation

    the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

    625 mW
  • Output Current

    The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

    700 mA
  • Max Supply Current
    1 mA
  • Voltage - Output
    -
  • Topology
    Step-Down (Buck)
  • Min Input Voltage
    8 V
  • Max Input Voltage
    27.6 V
  • Output Current per Channel
    500 mA
  • Current - Output / Channel
    -
  • Internal Switch(s)
    No
  • Dimming
    PWM
  • Voltage - Supply (Max)
    16.6V
  • Voltage - Supply (Min)
    8V
  • Features
    Automotive AEC-Q200, Moisture Resistant
  • Height Seated (Max)
    0.028 (0.70mm)
  • Width
    4 mm
  • Height
    1.5 mm
  • Length
    5 mm
  • REACH SVHC
    No SVHC
  • Radiation Hardening

    Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

    No
  • Lead Free
    Lead Free
  • Ratings
    AEC-Q200
0 Similar Products Remaining