Infineon Technologies TDA21240AUMA1

Factory Lead Time

26 Weeks

Mounting Type

Surface Mount

Package / Case

30-PowerTFQFN

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

20 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2012

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

30

ECCN Code

EAR99

Applications

Synchronous Buck Converters

Voltage - Supply

4.5V~7V

Terminal Position

QUAD

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

NO LEAD

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

1

Terminal Pitch

The center distance from one pole to the next.

0.45mm

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

JESD-30 Code

S-XQMA-N30

Input Voltage-Nom

5V

Interface

PWM

Analog IC - Other Type

SWITCHING REGULATOR

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

840μA

Output Configuration

Half Bridge

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

40A

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

20 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

10 ns

Input Voltage (Min)

4.5V

Input Voltage (Max)

7V

Control Technique

PULSE WIDTH MODULATION

Voltage - Load

5V~16V

Fault Protection

Protection against electric shock under. single fault conditions.

Shoot-Through, UVLO

Number of Drivers

1

Max Junction Temperature (Tj)

125°C

Load Type

Inductive

Features

Bootstrap Circuit

Height

1.1mm

Length

4mm

Width

4mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant