Infineon Technologies IR3553MTRPBF

Factory Lead Time

16 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

25-PowerVFQFN

Number of Pins

25

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

200 ns

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~125°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Series

PowIRstage®

Published

2007

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

25

ECCN Code

EAR99

Applications

Synchronous Buck Converters, Voltage Regulators

Voltage - Supply

4.5V~7V

Terminal Position

QUAD

Number of Functions

1

Frequency

1MHz

Base Part Number

IR3553MPBF

Output Voltage

5.5V

Max Output Current

The maximum current that can be supplied to the load.

40A

Input Voltage-Nom

12V

Interface

PWM

Analog IC - Other Type

SWITCHING REGULATOR

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

8mA

Output Configuration

Half Bridge

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

40A

Max Supply Current

12mA

Input Voltage (Min)

4.5V

Control Mode

VOLTAGE-MODE

Output Current per Channel

40A

Control Technique

PULSE WIDTH MODULATION

Voltage - Load

4.5V~15V

Fault Protection

Protection against electric shock under. single fault conditions.

Over Temperature, UVLO

Number of Drivers

1

Load Type

Inductive

Features

Bootstrap Circuit, Diode Emulation, Status Flag

Length

6mm

Width

4mm

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Lead Free