Infineon Technologies BTS5246-2L

Surface Mount

having leads that are designed to be soldered on the side of a circuit board that the body of the component is mounted on.

YES

Number of Pins

12

Power Dissipation (Max)

1.4W

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

250 μs

Usage Level

Automotive grade

JESD-609 Code

e3

Pbfree Code

yes

Moisture Sensitivity Level (MSL)

1 (Unlimited)

Number of Terminations

12

ECCN Code

EAR99

Resistance

19mOhm

Terminal Finish

Matte Tin (Sn)

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

150°C

Min Operating Temperature

-40°C

Terminal Position

DUAL

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

GULL WING

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

2

Supply Voltage

13.5V

Terminal Pitch

The center distance from one pole to the next.

1mm

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Pin Count

a count of all of the component leads (or pins)

12

Qualification Status

An indicator of formal certification of qualifications.

Not Qualified

Max Output Current

The maximum current that can be supplied to the load.

50A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

28V

Power Supplies

an electronic circuit that converts the voltage of an alternating current (AC) into a direct current (DC) voltage.?

9/16V

Number of Channels

2

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

28V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

4.5V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

3.2mA

Max Supply Current

4mA

Current - Output

6A

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

250 μs

Halogen Free

Halogen Free

Output Current per Channel

6.3A

Interface IC Type

HALF BRIDGE BASED PERIPHERAL DRIVER

Driver Number of Bits

2

Screening Level

AEC-Q100

Output Peak Current Limit-Nom

4.5A

Built-in Protections

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

Output Current Flow Direction

SINK

Length

7.5mm

Width

6.4mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant