Infineon Technologies ITS612N1

Mount

Through Hole

Package / Case

TO-220-7

Number of Pins

7

Power Dissipation (Max)

36W

JESD-609 Code

e3

Pbfree Code

yes

Number of Terminations

7

Termination

Through Hole

ECCN Code

EAR99

Resistance

160mOhm

Terminal Finish

TIN

Max Operating Temperature

The Maximum Operating Temperature is the maximum body temperature at which the thermistor is designed to operate for extended periods of time with acceptable stability of its electrical characteristics.

85°C

Min Operating Temperature

-30°C

Terminal Position

ZIG-ZAG

Number of Functions

2

Supply Voltage

12V

Pin Count

a count of all of the component leads (or pins)

3

Lead Pitch

2.54mm

Max Output Current

The maximum current that can be supplied to the load.

4A

Temperature Grade

Temperature grades represent a tire's resistance to heat and its ability to dissipate heat when tested under controlled laboratory test conditions.

COMMERCIAL EXTENDED

Number of Channels

2

Voltage

16V

Max Supply Voltage

In general, the absolute maximum common-mode voltage is VEE-0.3V and VCC+0.3V, but for products without a protection element at the VCC side, voltages up to the absolute maximum rated supply voltage (i.e. VEE+36V) can be supplied, regardless of supply voltage.

43V

Min Supply Voltage

The minimum supply voltage (V min ) is explored for sequential logic circuits by statistically simulating the impact of within-die process variations and gate-dielectric soft breakdown on data retention and hold time.

5V

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

600μA

Current

10mA

Power Dissipation

the process by which an electronic or electrical device produces heat (energy loss or waste) as an undesirable derivative of its primary action.

36W

Max Supply Current

600μA

Current - Output

3.5A

Max Input Voltage

16V

Output Current per Channel

2.3A

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

34V

Interface IC Type

BUFFER OR INVERTER BASED PERIPHERAL DRIVER

Driver Number of Bits

2

Turn On Time

The time that it takes a gate circuit to allow a current to reach its full value.

400 µs

Load Current

The Load Current can be defined as 1) Full load current the maximum current that an electrical machine can operate; 2) Rated Current the current rated on the nameplate of an electrical machine; 3) Nominal Current is generally mentioned in the specification documents that is normally the same value as the rated one.

4A

Output Peak Current Limit-Nom

4.4A

Turn Off Time

400 µs

Built-in Protections

TRANSIENT; OVER CURRENT; OVER VOLTAGE; THERMAL; UNDER VOLTAGE

Height

4.4mm

Length

9.9mm

Width

9.2mm

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant