Infineon Technologies BGF106CE6328XTSA1

Contact Plating

Contact plating (finish) provides corrosion protection for base metals and optimizes the mechanical and electrical properties of the contact interfaces.

Copper, Silver, Tin

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

8-UFBGA, WLCSP

Voltage Rated

RATED voltage is the voltage on the nameplate - the "design point" for maximum power throughput and safe thermal operation.

5.5V

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2013

Size / Dimension

0.047Lx0.047W 1.20mmx1.20mm

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Obsolete

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Type

Low Pass

Applications

Data Lines for Mobile Devices

HTS Code

HTS (Harmonized Tariff Schedule) codes are product classification codes between 8-1 digits. The first six digits are an HS code, and the countries of import assign the subsequent digits to provide additional classification. U.S. HTS codes are 1 digits and are administered by the U.S. International Trade Commission.

8504.50.80.00

Reach Compliance Code

unknown

Number of Channels

3

ESD Protection

Yes

Attenuation Value

Attenuation is the loss of signal strength in networking cables or connections. This typically is measured in decibels (dB) or voltage and can occur due to a variety of factors. It may cause signals to become distorted or indiscernible.

16.9dB @ 800MHz ~ 4GHz

Filter Order

The order of a filter also indicates the minimum number of reactive components that the filter will require. For example, a third-order filter requires at least three reactive components one capacitor and two inductors, two capacitors and one inductor, or in the case of an active filter, three capacitors.

2nd

Values

R = 47 Ω, 100 Ω, C = 16.5pF (Total)

Resistance - Channel (Ω)

47 100

Center / Cutoff Frequency

290MHz Cutoff

Height

0.026 0.65mm

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

RoHS Compliant