12.87180

Geyer Electronic 12.87180

Part No:

12.87180

Manufacturer:

Geyer Electronic

Datasheet:

-

Package:

SMD

AINNX NO:

34424602-12.87180

Category:

Crystals

Description:

Crystal 0.032768MHz ±20ppm (Tol) 9pF Flexural 70000Ohm Automotive 2-Pin SMD T/R

Products specifications
  • Package / Case
    SMD
  • Mounting Type
    Surface Mount
  • Package
    Bulk
  • Mfr
    PEI-Genesis
  • Product Status
    Active
  • Product Depth (mm)
    1.5(mm)
  • Operating Temp Range
    -40C to 125C
  • Mounting Styles
    Surface Mount
  • Mode of Oscillation
    FLEXURAL
  • Schedule B
    8541600080, 8541600080/8541600080, 8541600080/8541600080/8541600080, 8541600080/8541600080/8541600080/8541600080
  • Usage Level
    Automotive grade
  • Series
    *
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape and Reel
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -40°C ~ 125°C
  • Size / Dimension
    0.126 L x 0.059 W (3.20mm x 1.50mm)
  • Type
    Crystal
  • Frequency
    0.032768(MHz)
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    -
  • ESR (Equivalent Series Resistance)
    70 kOhms
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    9(pF)
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±20
  • ESR
    70000(ohm)
  • Screening Level
    AUTOMOTIVEC
  • Product Length (mm)
    3.2(mm)
  • Height Seated (Max)
    0.035 (0.90mm)
  • Product Height (mm)
    0.8(mm)
  • Ratings
    AEC-Q200
0 Similar Products Remaining