12.60090

Geyer Electronic 12.60090

Part No:

12.60090

Manufacturer:

Geyer Electronic

Datasheet:

-

Package:

4-SMD, No Lead

AINNX NO:

35459983-12.60090

Category:

Crystals

Description:

Crystal 24MHz ±20ppm (Tol) ±20ppm (Stability) 12pF FUND 50Ohm 4-Pin SMD T/R

Products specifications
  • Mounting Type
    Surface Mount
  • Package / Case
    4-SMD, No Lead
  • Package
    Tape & Reel (TR)
  • Mfr
    Geyer Electronic America, Inc.
  • Product Status
    Active
  • Operating Temperature

    The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

    -20°C ~ 70°C
  • Series
    SiT8209
  • Packaging

    Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

    Tape & Reel (TR)
  • Size / Dimension
    0.126 L x 0.098 W (3.20mm x 2.50mm)
  • Part Status

    Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

    Active
  • Type
    XO (Standard)
  • Voltage - Supply
    2.8V
  • Frequency
    133.333333MHz
  • Frequency Stability

    the variation of output frequency of a crystal oscillator due to external conditions like temperature variation, voltage variation, output load variation, and frequency aging.

    ±10ppm
  • Output
    LVCMOS, LVTTL
  • Function
    Standby (Power Down)
  • Base Resonator
    MEMS
  • Current - Supply (Max)
    36mA
  • ESR (Equivalent Series Resistance)
    50 Ohms
  • Current - Supply (Disable) (Max)
    70µA
  • Load Capacitance

    the amount of capacitance measured or computed across the crystal terminals on the PCB. Frequency Tolerance. Frequency tolerance refers to the allowable deviation from nominal, in parts per million (PPM), at a specific temperature, usually +25°C.

    12pF
  • Operating Mode

    A phase of operation during the operation and maintenance stages of the life cycle of a facility.

    Fundamental
  • Frequency Tolerance

    the maximum allowable deviation from the nominal crystal frequency at a specified temperature, usually 25℃. The recommended frequency tolerance of the crystal over the manufacturing process is ±50 ppm.

    ±20ppm
  • Absolute Pull Range (APR)
    --
  • Height Seated (Max)
    0.032 (0.80mm)
  • Ratings
    --
0 Similar Products Remaining