Broadcom Limited ACPL-333J-500E

Factory Lead Time

17 Weeks

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

16-SOIC (0.295, 7.50mm Width)

Number of Pins

16

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~105°C

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Tape & Reel (TR)

Published

2011

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Active

Moisture Sensitivity Level (MSL)

1 (Unlimited)

ECCN Code

EAR99

Max Power Dissipation

The maximum power that the MOSFET can dissipate continuously under the specified thermal conditions.

600mW

Approval Agency

CSA, IEC/EN/DIN, UR

Voltage - Isolation

5000Vrms

Output Voltage

400mV

Max Output Current

The maximum current that can be supplied to the load.

2.5A

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

5V

Number of Channels

1

Voltage - Forward (Vf) (Typ)

1.6V

Propagation Delay

the flight time of packets over the transmission link and is limited by the speed of light.

250 ns

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

250 ns

Direction

Unidirectional

Rise Time

In electronics, when describing a voltage or current step function, rise time is the time taken by a signal to change from a specified low value to a specified high value.

50ns

Fall Time (Typ)

50 ns

Rise / Fall Time (Typ)

50ns 50ns

Reverse Breakdown Voltage

5V

Current - DC Forward (If) (Max)

25mA

Input Current

400mA

Propagation Delay tpLH / tpHL (Max)

250ns, 250ns

Common Mode Transient Immunity (Min)

15kV/μs

Pulse Width Distortion (PWD)

100 ns

Voltage - Output Supply

15V~30V

REACH SVHC

No SVHC

Radiation Hardening

Radiation hardening is the process of making electronic components and circuits resistant to damage or malfunction caused by high levels of ionizing radiation, especially for environments in outer space (especially beyond the low Earth orbit), around nuclear reactors and particle accelerators, or during nuclear accidents or nuclear warfare.

No

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant