Analog Devices Inc. ADP199ACBZ-R7

Lifecycle Status

PRODUCTION (Last Updated: 2 weeks ago)

Mount

Surface Mount

Mounting Type

Surface Mount

Package / Case

4-UFBGA, WLCSP

Number of Pins

4

Weight

68.407399mg

Turn Off Delay Time

It is the time from when Vgs drops below 90% of the gate drive voltage to when the drain current drops below 90% of the load current. It is the delay before current starts to transition in the load, and depends on Rg. Ciss.

60 μs

Operating Temperature

The operating temperature is the range of ambient temperature within which a power supply, or any other electrical equipment, operate in. This ranges from a minimum operating temperature, to a peak or maximum operating temperature, outside which, the power supply may fail.

-40°C~85°C TJ

Packaging

Semiconductor package is a carrier / shell used to contain and cover one or more semiconductor components or integrated circuits. The material of the shell can be metal, plastic, glass or ceramic.

Cut Tape (CT)

Pbfree Code

no

Part Status

Parts can have many statuses as they progress through the configuration, analysis, review, and approval stages.

Discontinued

Moisture Sensitivity Level (MSL)

3 (168 Hours)

Number of Terminations

4

ECCN Code

EAR99

Resistance

40mOhm

Terminal Position

BOTTOM

Terminal Form

Occurring at or forming the end of a series, succession, or the like; closing; concluding.

BALL

Peak Reflow Temperature (Cel)

NOT SPECIFIED

Number of Functions

1

Supply Voltage

1.8V

Time@Peak Reflow Temperature-Max (s)

NOT SPECIFIED

Base Part Number

ADP199

Pin Count

a count of all of the component leads (or pins)

4

Number of Outputs

1

Output Type

P-Channel

Max Output Current

The maximum current that can be supplied to the load.

500mA

Operating Supply Voltage

The voltage level by which an electrical system is designated and to which certain operating characteristics of the system are related.

3.6V

Supply Voltage-Min (Vsup)

0.9V

Number of Channels

1

Interface

On/Off

Analog IC - Other Type

POWER SUPPLY SUPPORT CIRCUIT

Operating Supply Current

900nA

Nominal Supply Current

Nominal current is the same as the rated current. It is the current drawn by the motor while delivering rated mechanical output at its shaft.

500mA

Output Configuration

High Side

Output Current

The rated output current is the maximum load current that a power supply can provide at a specified ambient temperature. A power supply can never provide more current that it's rated output current unless there is a fault, such as short circuit at the load.

500mA

Voltage - Supply (Vcc/Vdd)

Not Required

Adjustable Threshold

NO

Input Type

Non-Inverting

Turn On Delay Time

Turn-on delay, td(on), is the time taken to charge the input capacitance of the device before drain current conduction can start.

20 μs

Switch Type

Based on their characteristics, there are basically three types of switches: Linear switches, tactile switches and clicky switches.

General Purpose

Min Input Voltage

900mV

Max Input Voltage

3.6V

Nominal Input Voltage

The actual voltage at which a circuit operates can vary from the nominal voltage within a range that permits satisfactory operation of equipment. The word “nominal” means “named”.

3.6V

Ratio - Input:Output

1:1

Voltage - Load

0.9V~3.6V

Rds On (Typ)

40m Ω

Features

Slew Rate Controlled

Height

330μm

Length

800μm

Width

800μm

REACH SVHC

No SVHC

RoHS Status

RoHS means “Restriction of Certain Hazardous Substances” in the “Hazardous Substances Directive” in electrical and electronic equipment.

ROHS3 Compliant

Lead Free

Contains Lead